5 Surprising Facts about U.S. Manufacturing

July 12, 2017 at 12:54 PMChad Moulder

 5 Surprising Facts About U.S. Manufacturing

American Welder in Action

In this week's post, we look at five surprising (and frankly, amazing) facts about the current state of the United States manufacturing industry. 

The Manufacturing Industry is the largest and most dynamic sector of the U.S. economy.

MarketWatch estimates that the gross output of US manufacturing accounts for roughly 36% of the nation's GDP or about $6.2 trillion dollars annually. This is nearly double any other sector such as government, real estate, and professional and business services. Even more surprising when one looks at the fact that the manufacturing industry accounts for only one out of every 11 jobs in the US.


U.S. Manufacturing is the world's 3rd largest economy on the planet.


US Manufacturing VS the World (chart)

According to the Manufacturing Institute, in the 20 years ending in 2012, manufacturing output increased more than 83 percent. This feat is even more impressive when one considers that the United states suffered not one but three major recessions including the "Great Recession" which lasted more than six years and a decline in US GDP of 5.1%. 


The Manufacturing Industry is leading the way on renewable energy.

Solar Array Mountain background

According to the U.S. Energy Information Administration, the manufacturing industry used 2,269 BTUs of renewable energy, more than the three other sectors combined. Additionally, of all the sectors manufacturing was the only sector to reduce their CO2 emissions. In fact, between 1990 and 2012 the manufacturing industry has shrunk their CO2 footprint by 13%; no small feat. 


Manufacturing is investing heavily on research and development. 

Research and Development

Annually, the manufacturing sector invests roughly 3.9% of their total sales back into research and development. This is well above the 2.3% found in other industries. This forward-looking approach has yielded many boons for the economy and country in general and should also be credited with the push for greater STEM education as a means of protecting domestic economic security and creating a talented, competitive workforce.


The vast majority of manufacturing companies in the United States are actually very small.

Small Business Manufacturing

In 2014, there were 251,901 firms in the manufacturing sector, with all but 3,749 firms considered to be small (i.e., having fewer than 500 employees). In fact, three-quarters of these firms have fewer than 20 employees. (Source: U.S. Census Bureau, Statistics of U.S. Businesses)


Posted in: General | News | Production

Tags: , ,

New Release - All Orders Data Import/Export Optimization

June 6, 2017 at 4:00 PMChad Moulder


All Orders 6.2.16

DOWNLOAD 64bit 32bit


What's New

Starting with release 6.2.16, All Orders has added features that will enable users to easily export/import and edit bulk information within the software.

This is was one of the most requested features from our users and was voted on at the "Creative Feature Session" at this year's CRUNCHTREAT.

In addition we have enhanced our tools for update BOMs in bulk, added multi line custom fields and more. Read on for the details!  



You will notice on various lists and entity editing screens throughout the system a new Excel Export button. Some of the more popular ares it is available in include the item, customer, vendor and price level lists. This button can be used to export the data you need into the same format as our standard Excel import templates. By doing this we eliminate the need for exporting data from reports and then copying and pasting into our standard import template. Now you can export, make the changes you need and then import all without having to copy and paste a thing!


Bulk Updating BOMs

We've added a new and enhanced screen that will allow users to bulk edit bill of materials (BOMs). Simply go to the Production menu and click on the Bulk Update BOMs button.From here users can easily add new components in bulk, remove components in bulk or replace existing components in bulk. Select the components and the assemblies and click Process to quickly and efficiently get all your BOMs in order!

Multi Line Custom Fields

Ever wanted to add a new custom field to have notes, comments, or store any other type of data that needs to have multiple lines? Now you can! When managing custom fields and adding or modifying a Text type of field a Lines box will appear where a number of lines can be entered for how many lines should be visible for that custom field. Once a number larger than 1 is entered it automatically turns the custom field into a multi line that can store as many lines as needed and the number entered will be how many lines are immediately visible on the custom field entry screen before the user needs to scroll down.

Customer/Vendor Notes

Now users can view notes and comments for customers and/or vendors while saving order documents.

Edit Custom Fields on read only Ship Docs

Now users can create and edit custom fields on shipping documents even after the document has been marked as shipped or invoiced which would have rendered the fields as read only in the past.

Additional Features

  • Importing sales order from QB picks up custom fields as well.
  • Setting for showing customer/vendor notes when saving order documents.
  • Cost fields on the BOM screen made wider.
  • Download button on the attachments screen for downloading web based attachments locally.
  • New setting to leave inactive items off new order being created by duplicating existing orders.

We're always working to improve All Orders. If there is a feature you would like to see in a future release, please take a look at feature release page (link) to vote on other user-submitted suggestions or to submit your own.

For more information about this release, please email contact@numbercruncher.com. For details about CRUNCHTREAT 2018, including registration, programming and sponsorship opportunities, please contact chad@numbercruncher.com.

New Years, Same Crunch

December 29, 2016 at 7:43 AMJoshua Goldberg

As 2016 comes to a close, we take the time to reflect on the past year and look forward to the next 12 months. 2017 should bring a lot of excitement for Numbercruncher.com with our upcoming Client Retreat in February & the launch of Order Time, our Web based Inventory, Orders & Customer Management software

We are 39 days away from our First Client Retreat & the Retreat Hotel discounts end on January 6th! If you are planning on attending, and haven't reserved your hotel yet, please book it prior to January 6th. Recently we released our Retreat Agenda Topics & will be releasing a more detailed Agenda with times, during the first week of January, keep checking the Retreat Agenda page for the latest details.

Since we always get requests for new features, we decided as an added bonus for attending the Client Retreat, all attendees will be instrumental in helping Numbercruncher decide on our newest feature for All Orders!  

Numbercruncher is excited to announce 71lbs & GoToItSolutions as our Retreat Sponsors! 

Did you know that if your business ships via FedEx or UPS, you are entitled to refunds on all late shipments, invoice errors and lost or damaged packages? 71lbs will track down your shipping refunds that your business is entitled to, but probably don't know about, with zero effort on YOUR part! 

GoToItSolutions help you tap into software solutions customized specially for the needs of your business by combining their extended knowledge of consulting and IT. They do what they do best, so you can do what you do best!

Numbercruncher.com wishes all of our customers a Happy & Healthy New Years & Successful 2017!

Finally, Numbercruncher's CEO Ian Benoliel, would like to end 2016 with some parting words; "Here is what I learned in 2016. Two friends of mine, both under 50 years old, have been battling Cancer. Health issues are BIG problems, everything else are small problems. If you take that approach, you will find yourself enjoying life a lot more." 

Posted in: AllOrder | Features | General | News | Order Time | Retreat

Tags: , , , , , , ,

Holiday Crunch

November 22, 2016 at 11:54 AMJoshua Goldberg

Hey Cruncher family, hope everyone's looking forward to the upcoming Holiday season! The Numbercruncher offices have been hustlin and bustlin lately with the launch of All Orders CRM Beta & our upcoming launch of Order Time, as well as the planning for our upcoming Client Retreat. Today's blog post will cover All Orders CRM, our Holiday Flash Specials & information about the new All Orders version 6.2.10.

All Orders CRM Beta is a web based system that shares you All Orders Desktop data and is used primarily for:

  • Leads, Customers & Contacts Management
  • Quotes & Sales Order Generation
  • Inventory Lookup
  • Activity Tracking (Tasks, Events, Emails & Logs)
  • Reporting
  • In order to run the All Orders CRM Beta, you must have a valid license or trial key for BOTH All Order (AO) & All Orders Web (AOW). The AOW key powers up the system, while the AO key defines how many users can be listed. All Orders CRM was created because the demand for installed software has been eclipsed by the demand for cloud software. As such Numbercruncher is taking steps to port the desktop software, our customers know and love, to the cloud. All Orders CRM is the first step in that direction. All Orders CRM is the basis for our new flagship product Order Time. Order Time will be a completely hosted browser based version of All Orders that will be licensed on a subscription basis. This new interface will make it possible to truly control your business from anywhere at anytime. After the launch of Order Time, our clients will have the choice between a desktop solution & a cloud solution
    As a thank you to our customers, we will be running FLASH SPECIALS between Thanksgiving & Christmas. Check the Special Offers page, located under Contact on the Numbercruncher website to see the current specials! Most specials will be one-day-only, so make sure you frequently check the page. While most specials will be announced the day of, we decided to announce our first two specials early. The first special is for new customers and will occur on Saturday, November 26th for American Expresses Small Business Saturday. New Customers who Purchase ALL ORDERS on 11/26 with an American Express Credit Card, will receive 10% back from Numbercruncher. The other special we are announcing early is for Cyber Monday. Cyber Monday will mark 70 days until our Client Retreat, so we are offering $70 off your registration purchase! Use code CYBER at checkout between 12:01am & 11:59pm on 11/28. Visit the Special Offers page for more details.
    Finally this week, the Numbercruncher Development team is happy to announce the release of All Orders 6.2.10. Please find the New Features & Known Issues Fixed below:

  • Added: Option to copy parent customer shipping addresses when setting a parent to a customer/job
  • Added: Payments/Refund can be added to read only ship docs/returns
  • Added: Option to add a customer/job column on the item grid for PO's & Receive item documents to assign a customer/job to each line item
  • Added: Lead Time optional column on the sales order
  • Added: Ability to turn report data fields into live, clickable links when exporting the report to PDF
  • Fixed: Error when trying to save changes to a sales rep
  • Fixed: Errors when deleting contacts
  • Fixed: One time components not getting the correct quantity during the flatten process
  • Fixed: Line items on PO's for foreign currency not having correct costs
  • Fixed: Error when clicking the column headers on the PO screen
  • Fixed: Linked documents on some repair orders incorrect
  • If you haven't upgraded to 6.2.10 please visit our Software Updates page or contact Support at either 866-278-6243 or support@numbercruncher.com to schedule an appointment to have you system updated.
    Hope everyone has a Happy & Healthy Thanksgiving weekend and start of the Holiday season!

    Falling into Autumn

    October 31, 2016 at 8:58 AMJoshua Goldberg

    Hey Crunchers, hope everyone had a successful October and is ready for the Holiday season! So our readers know, our blogs until the end of the year will be more condensed, as we finish development on our newest product, Order Time.

    Although we are focused on finishing & releasing Order Time, one thing we are committed too is not letting our support or development on All Orders slip. This is evident by our upcoming release of All Orders version 6.2.7. The newest release adds 15 new features & fixes some common issues (i.e. Duplicate item error when trying to reconcile QuickBooks to All Orders.) Please visit our known issues section of our support page to view the full list of Added & Fixed Features of 6.2.7.

    One new feature area I would like to highlight briefly has to do with Packages. With All Orders, you can now create Packages & Boxes and can specify what items go into each Package/Box. In order to use this new feature, you need to manually turn it on by going to Preferences --> Shipping --> Company Preferences --> Package. After turning the preference on, you now have the ability to:

    • Create (either Automatically or Manually generated) & Print UCC's (Uniform Commercial Codes)
    • After inserting Items on your Ship Doc, you can click on the Package Button & Create Packages for Shipment
      • You can create Default Weight Properties for Package Types & Create Tracking Numbers
    • Once the Packages are created, you can create & view a Package Manifest that shows the breakdown of quantities
    • Integrate your shipping with FedEx & UPS

    Just a quick reminder that TODAY is the final day to get discounted registration for the Numbercruncher Client Retreat! Use code NC17 to save at checkout until 11:59pm TONIGHT (10/31)! The Client Retreat will be held February 6th through 9th in Dania Beach, Florida and will cover topics on All Orders, All Orders Web, All Orders Mobile, Integration Options, Business Cycles, Inventory Primer, Reports & More! The Retreat is the perfect opportunity to learn everything you ever wanted to know about current & future Numbercruncher products, as well as, the perfect opportunity to escape the harsh winters of up north!

    The end of the year is fast approaching, make sure your All Orders software is setup and working properly before the holiday rush hits! Don't hesitate in contacting us, if you have any questions or need to setup training

    Warming up with changes

    September 30, 2016 at 8:43 AMJoshua Goldberg

    Hey Cruncher followers! Hope everyone is enjoying their start of Autumn. Autumn notoriously brings change; whether its leaves on the trees or your pumpkin designs for Halloween. Here at Numbercruncher, we're welcoming change with the development of our newest product, Order Time. More details will be announced in the coming months, but I want to start off this blog with clearing up a misconception we've been hearing. 

    Order Time is going to be a cloud based solution for Inventory & Order Management needs. We will be offering a conversion from All Orders to Order Time, for those customers who are interested. We will not be forcing any customers to switch nor will Numbercruncher stop servicing or providing support for All Orders. We are developing this new product to provide our services to more clients, not limit the services of our existing customers. Follow our blog for updates leading up to launch! 

    Speaking of All Orders, we are excited to bring two new features to our clients! The first feature is Complex Calculations & the other is a Bound Book.

    The Complex Calculations feature is for manufacturers that need to figure out the quantity of an item that is calculated with different quantities or formulas. This feature is fully customizable without any additional cost to you!

    EXAMPLE of Complex Calculations:

    Typically a user would enter an item, quantity and price on a sales order. However the requirement is the quantity is determined as 

    Let P = # of Pieces. 
    Let F = Feet 
    Let I = Inches 
    Let Q = Quantity Ordered 

    Q = P X (F + I/12) 

    Using custom fields, we customize All Orders such that the Quantity box cannot be edited directly rather the user will have to enter P, F and I for Quantity. 

    We recently did a Complex Calculation customization for DCM Computing Service's client Berry's Tin Shop.

    The following is a review of All Orders Complex Calculations by the Owner of DCM Computing Services, Danny Morris, "At DCM Computing Services I look to help my clients meet their business needs.  When Berry's Tin Shop approached me about needing a sales system for their manufacturing business, I went to Intuit to see about systems that integrated with Quickbooks.  One of their recommendations: NumberCruncher.  Berry's Tin Shop had a unique need to track inventory of a product which they sold by the linear foot.  At the sales counter, however, they sold custom length pieces.  The complex Calculations that NumberCruncher customized for us allows the salesman to make purchase orders of specific custom products from a single inventory item.  For example, one customer can order 15 panels of 29 gauge dark red tin cut at 8'6".  The manufacturing floor will see the order and from the single roll of dark red 29 gauge tin, custom cut the pieces as needed.  The inventory system and invoice system will see an order of [number of pieces * (feet + inches)]  or in this case 15*8.5 linear feet (127.5) * the cost per linear foot.  No more need to calculate the linear feet needed by hand and no more error.  The invoice is also customizable to include these fields for the needed products.  Now the customer, salesperson, back-office, and manufacturing floor can all be on the same page, literally."

    This is just one example of how the All Orders Complex Calculation feature can benefit your business. To find out more, please contact us today!

    The other exciting new feature All Orders is bringing to our clients is the All Orders Bound Book. The All Orders Bound Book application allows companies buying and selling firearms to maintain a bound book database in accordance with FTA regulations. As transactions are entered into the All Orders system the separate bound book database can be synchronized and auto populated based on the inventory in and out. These transactions include: 

    • ·         Serial #s going out of inventory on shipping documents.
    • ·         Serial #s going into inventory with receiving documents.
    • ·         Serial #s going out of inventory as components on work orders.
    • ·         Serial #s going into inventory as assembled items on work orders.
    • ·         Serial #s going into and out of inventory on adjustment and transfers. 

    Columns available on the bound include: 

    • ·         In Manufacturer/Importer
    • ·         In Model
    • ·         In Serial #
    • ·         In Type Of Firearm
    • ·         In Caliber/Gauge
    • ·         Date In
    • ·         In Name/Address
    • ·         Completed Manufacture Date
    • ·         Out Manufacturer/Importer
    • ·         Out Type Of Firearm
    • ·         Out Caliber/Gauge
    • ·         Date Out
    • ·         Out Name/Address
    • ·         Style #
    • ·         Item #
    • ·         All Orders Document In
    • ·         All Orders Document Out
    • ·         Notes

     Some of the features include:

    • ·         Search for any data in any column
    • ·         Hide/show columns
    • ·         Setup users with their own user name and password
    • ·         Import additional entries from Excel
    • ·         Export to CSV
    • ·         Printable Bound Book and Inventory reports
    • ·         Maintain Excise Tax/Annual Report based on bound book and All Orders data with columns including serial #, type of firearm, date out, name/address out, order #, item #.

    An example of how the Bound Book looks in All Orders. To view the full Bound Book example, please click HERE then click the MORE tab


    These are just a few of the new features All Orders introduced recently. Please contact us to find out what else our clients now have access too!

    Just as a reminder, out Client Retreat is fast approaching! Register for the Retreat with promo code NC17 before November 1st, to take advantage of our presale discount! Also check out the Agenda section of our Retreat Website to view the Topics we will be discussing at the event

    NumberCruncher's First Client Retreat

    September 9, 2016 at 8:44 AMJoshua Goldberg


    Here at Numbercruncher, we pride ourselves on our client relationships. We know we wouldn't be around, if it wasn't for you, our customers. So we decided after 17 years, it's time to welcome the heart and soul of NumberCruncher.com, to Sunny South Florida. We figured what better time to host the event then during the harsh Winter month of February.

    That's right! Numbercruncher.com is excited to announce our first Client Retreat! Come escape the cold while relaxing under the Palm Trees & Sun in Dania Beach! 

    The Retreat will be held at the Hyatt Properties (Hyatt House/Hyatt Place) February 7th & 8th, with a welcome reception the evening of Monday, February 6th. In addition, we have some exciting events planned for the evenings of the Retreat.

    When booking your hotel, you have the choice to stay at either property. Our Expo Room will be located at Hyatt House, while our Informative Sessions will be at Hyatt Place. Both hotels are directly across the street, and takes less than 30 seconds to walk between the properties

    The theme of the Retreat is Refresh, Relax & Reconnect. We want our Cruncher Clients to REFRESH their knowledge of the Numbercruncher family of products, RELAX in the South Florida sun by escaping the rough Winter of the North & RECONNECT with our Trainers and network with your fellow Crunchers

    To find out more about the Retreat, please click on one of the links below:

    Numbercruncher Website

    Retreat Website

    Registration Website

    Hyatt Place Reservations

    Hyatt House Reservations

    As a special bonus to our Blog readers, use promo code BLOG at checkout to receive 15% off your RegistrationThis code will be good until our next blog post gets published at NOON on September 23rd

    It's all a numbers game

    August 12, 2016 at 8:00 AMJoshua Goldberg

    Hey Crunchers, I Hope everyone's saying T.G.I.F. and is looking forward to the start of the weekend! As usual, its been a hectic and busy week here at the NumberCruncher offices. Other then our normal daily workload, we have been working on some new and exciting projects, that I know everyone here can't wait to announce! Make sure to follow our blog, our social media channels and your email inboxes for all these upcoming announcements.

    As the end of the year starts to roll around, your company will start to reevaluate your software choices. Maybe in years past you just went with the software that you already knew. This year take a leap out of your comfort zone, and give All Orders by NumberCruncher a try!  To guarantee our software is a perfect fit for your company, we require all new users to have a hour-long software demo, with our CEO or CTO. We do this to make sure our customers know the ins-and-outs of our software, as well as, it allows all future clients a platform to ask any questions they may have about the software or what it does. After this demo, we supply you with a 30-day no commitment FREE trial of the software, so you can see just how beneficial All Orders by NumberCruncher really is! After that trial, you can decide to join the Cruncher family and pay a one time fee for the software, which includes your first year of support. After the first year, you just pay a yearly fee for support. All software updates are included in your yearly support plan! To help our clients know exactly how much they will be paying with us, we have created our Pricing Calculator and positioned it right on our website, so new clients can see exactly how much they will be spending.



    Simply fill out the form and it will tell you what your initial cost will be and what your reoccurring yearly maintenance plan will be. 

    If you are interested in scheduling a demo of All Orders, please click HERE or give us a call at 1-866-CRUNCHER, Today! 

    Here at NumberCruncher.com, we truly feel we would be nothing without our loyal clients. This is the reason that we strive for the best customer service and always put our customers first! If you EVER have any questions, comments or concerns please immediately call us at 1-866-CRUNCHER (278-6243) or email us at support@numbercruncher.com. Our office hours are Monday - Friday 9am to 5pm EST. If you email/call after business hours, someone will contact you within 2 business days. If you are having issues and need help sooner, please call us back at the start of the following business day, so we can attempt to solve your issue immediately. 

    RefreshRelax & Reconnect 


    As mentioned in our last blog, Numbercruncher.com will be having our 1st annual NumberCruncher Retreat, this upcoming February in SUNNY & WARM Ft. Lauderdale, FL! Details will be announced & registration will open on September 1st, but as a loyal Cruncher blog reader, you are getting an exclusive! The Retreat will be the beginning of February 2017! Our blog post on Friday September 2nd will have a full preview of the event, but in the meantime, follow our Retreat twitter at @NCRetreat2017 for the latest news!


    $100,000 Small Business App Showdown

    at QuickBooks Connect 2016


    Finally this week, I just wanted to remind everyone about the Intuit App Challenge. All Orders by NumberCruncher was selected as a participant for this years showdown, which is held at QuickBooks Connect in San Jose, California in October. The voting for the event is August 16th through the 31st. On Monday, I will be publishing a special blog post on how to vote for All Orders by Numbercruncher.com. We really need all our Loyal Cruncher Family to support us and vote once per day, so we can show the entire QuickBooks community that NumberCruncher is a dominate force in the Inventory Software space! Please check back on Monday and follow our Twitter, Facebook & Linkedin pages for the latest information on the event.

    Also, I know i wrote in the last blog post, I would include a sneak peek of Order Time, but I promise the wait will be worth it! Keep checking back & follow our Order Time Twitter for the latest on this revolutionary new software being brought to you by Numbercruncher.com!

    Keep pushing through those Friday feelings and I Hope everyone has a great weekend! 

    The Summer Crunch

    July 25, 2016 at 8:37 AMJoshua Goldberg

    Hey Everyone! Hope you enjoyed your weekend and are ready for another busy work week! I know the NumberCruncher blog has been on a bit of a hiatus the last couple of weeks, but we're back and ready to Crunch through these long hot South Florida summer days. During these summer months our Support Team has been hard at work answering our current clients questions and helping setup All Orders by NumberCruncher on new client's networks. The grind never seems to slow down at our offices, especially during summer, when companies are reevaluating their current Inventory Management software and are deciding if its up-to-par or if their needs are not being met or satisfied. If your company is in the midst of reevaluating your software, please remember that NumberCruncher provides all prospective clients with an hour-long demo to make sure our software is a perfect fit, as well as, a 30-day no commitment FULL software trial before you decide to buy. We don't want your company buying our software, if it isn't the ideal fit for your business. To Learn more about ALL ORDERS please click HERE or give us a call at 866-278-6243 TODAY!

    Recently, All Orders by NumberCruncher got featured on a number of websites. To begin the month, Financesonline.com wrote a review and named ALL ORDERS as one of their Rising Stars for 2016. Finances Online also recognized All Orders with their Great User Experience Certificate & Award. 


    NumberCruncher.com would like to thank Financesonline.com for recognizing us and writing a review on All Orders. Finances Online is the fastest growing independent review platform for B2B, SaaS and Financial Solutions.  

    Also this month, Scott Gregory of Better Bottom Line: the QuickBooks Expert, included NumberCruncher in his "Can QuickBooks Handle My Inventory?" guide. Scott is a certified QuickBooks Expert who has worked with QuickBooks software for 15+ years and knows a thing or two about QuickBooks add-on solutions. For him to feature NumberCruncher is his guide, is a big deal to us!


    To check out the FREE Inventory guide or to learn more about QuickBooks solutions, please visit BetterBottomLine's website HERE.



    Refresh, Relax & Reconnect at the 2017 NumberCruncher Retreat

    The NumberCruncher team has also started planning a NumberCruncher Retreat here in Sunny South Florida, during the rough Winter months. Details are being finalized and you can expect an official announcement VERY SOON! If you are interested in attending or know someone in your company who will be interested, please send me an email at jgoldberg@numbercruncher.com with the details, so i can add you to our Pre-Announcement Blast. By being a part of our Pre-Announcement Blast, you will be the first to receive the event flyer and registration information, ALSO, you will receive a special prize during the Retreat, for being part of our Pre-Announcement Blast List.

    The purpose of this Retreat is too allow our clients a refresher on the NumberCruncher family of products, an introduction to our NEWEST software and most importantly a chance for us to reconnect with our loyal customer base, in a relaxing, stress-free, Sunny and HOT environment; while the rest of the country is getting hit by Winter storms. 

    Follow our Blog, Website and Social Media channels (Twitter, Facebook, Linkedin Company Page, Linkedin Group) to stay up-to-date on the latest developments of the NumberCruncher Retreat. 



    Finally this week, NumberCruncher has entered our All Orders software into the 2016 $100,000 Intuit Developer Small Business APP Showdown with the winner being announced at QuickBooks Connect 2016 being held in October in San Jose, California.


    More information on how to vote, will be published in an upcoming BLOG post, an email blast & our Facebook/Twitter pages. In Order to WIN, we're going to need the help of our Loyal Cruncher Family! Please follow our Blog/Social Media pages, to find out about some perks we are offering for those clients who vote for us, in the $100,000 Intuit Developer Small Business APP Showdown

    The next NumberCruncher Blog will feature a sneak peek of our newest software, that we are releasing at the beginning of next year (2017)! Make sure you check back next week for the latest on Order Time!

    Just because it's a short week, that doesn't mean it's a slow week!

    July 5, 2016 at 10:06 AMJoshua Goldberg

    Hey NumberCruncher Crusaders, hope everyone is recovered from Independence weekend and is ready for this short week to fly by! Summer is in full force and our calendars are filling up, FAST! If you or your company needs any training sessions or help, make sure you give our Customer Success Specialist, Michelle, a call at 866-278-6243 ext 815 or email her at support@numbercruncher.com, to schedule some time with one of our trainers! Our training hours are one of the main features that makes us stand out from our competitors, always remember that your training hours refresh every year, when you renew your maintenance plan. Don't let your hours go to waste! 

    Speaking of training, NumberCruncher would like to welcome Veronica Marcano to the family! Veronica will be the new Director of Training for NumberCruncher.com. She brings with her 10+ years of software training expertise and we are extremely excited to welcome her to the team!  

    Since I was brought on to the NumberCruncher team, my goal has been to help NumberCruncher be seen and get as much market exposure as possible! One such way we will be going upon this, will be our revamped Partner Program that we will be debuting in the next few months. We already began signing up companies, but are still looking to add partners, before we debut. If you are interested in having your company partner with NumberCruncher.com, please send an email to jgoldberg@numbercruncher.com. Every few weeks, we'll have a spotlight section in our weekly blog that will highlight our partners and the ways their products/services can benefit your business. Our first spotlights will be in this weeks BlogBlast, which will be released Friday afternoon. 

    The NumberCruncher team is still actively showing and enrolling our customers in the NEW All Orders Integrator. The Integrator is getting outstanding reviews and feedback from our loyal, longtime customers and all of us here at NumberCruncher.com are extremely excited with the responses we have been receiving! Click HERE to read more about the integrator, and HERE to read the products press release. 

    Finally, the Institute of Food Technologists trade show is fast approaching, next week, and I know i'm extremely excited to attend and check out all the latest innovations when it comes to the food industry and the different ways NumberCruncher can help in the process. If you will be attending IFT2016 or your company is located in the Chicago area, and would like to meet, please leave a comment below or email me at jgoldberg@numbercruncher.com and I'll contact you to set something up.

    Hope everyone has a great 4-day work week!